Marine grade socket, bootand waterproof Little fuse quality fuse holder plus 15 amp fuse.
Now with wire terminal boot/ cover and two female crimp connectors.
This is a kit of a female socket assembly and a waterproof fuse holder and fuse. The socket is marine grade and is weather resistant made out of heavy nylon plastic. A cap included, seals the front of the socket while a boot protects the wire contacts from weather. The contacts are nickel plated. The socket is vibration resistant,unlike less expensive versions. It requires an 1 1/8" hole for mountingand has .250 quick male connectors. It can be mounted against a panel, up to 1-1/4 thick, with the retaining nut or for a thicker panel with the compression plate. The socket is rated at 150 watts at 12 Volts, 15 amps peak. Draws no power when not in use.
The fuse holder is a high quality US brand Littlefuse fuse holder with nickle plated contact. It has a low profile design and is much smaller that less expensive non branded fuse holders. comes with 8 inch 18-16 gauge wire leads with UV resistant waterproof enclosure. The fuse holder is rated at up to 20 amps at 12 Volts.
The socket works with any standard cigarette lighter plug or lockable marine plug.
Socket options (contact us):
-Add illumination to the interior of the socket. Thesocket will glow with the desired LED color. Indicates power is on and helps atnight. Available in green, red, blue and yellow (your choice). time you buy this socket assembly.
-Add a right angle boot for tight installations.
Not for hot lighter use.