This is a listing for a dual USB charger that operates off of 12 volts and a 12 volt accessory socket. Also included is are rubber mounting washers and a connecting cable that allows the two devices to be connected together and too your power cable. The material are of high quality and can be used for outside operation. #ycn8/cr/cu/tplt/2sw
3.1 amp output at 5 volts.
Over-current over-voltage, over-load and over-temperature protection.
The intelligent control will prolong the cycle life of the battery.
Environmentally friendly, energy-saving, complying with the safe certification standard.
High working efficiency: over 85%, good charging performance.
Rapid charging your phone safely and without overcharging your battery.
Replaces Blue Sea Systems equivalent.
1: Input : 12V
2: Output : 5V---3.1A
3: Rapid charging for mobile phone
4: IC chip inside prevents overcharging and short circuit
The chargers fit in a 1-1/8” holes in panels up to 1-1/2 inch thick with just the backing nut. The plate has two holes are side by side on 1-3/4” centers. The plate dimensions are 4.2” x 1.7” . Includes screws.
The 12 volt socket is rated for 15 amps at 12 volts and has a waterproof cap.
The connecting cable allows the two chargers to be chained together and a male double female allows the two to be connected to your cable harness.
Higher volume discounts available for 10 or more contact us.