Great for GPS, iPod, Cell and all 12 volt accessories. #ct/a60-nb/hmnt/4ty/splg/pba
This is a kit of one female lighter plug socket lighter socket with cap, rubber cover/boot, 60 in./5 ft. 16 gauge wire harness also known as a loom, mini waterproof fuse holder and 15 amp fuse and a handlebar mount. Includes Lighter plug with plug skirt. Comes with installation instructions.
The lighter socket which has a heavy UV resistant body and a nickel plated core. A vinyl opening cap inserts into the core and snaps over the socket rim to produce a waterproof seal. The socket works with all pop out style hot lighter plugs or with standard 12V accessory plugs. Internal prongs hold the plug for better vibration resistance. The terminals are male 0.250 or 6mm style crimp terminals. Rubber terminal boot keeps wire connections dry.
Patent pending by 12vtechnology.
Rated for 20 amps at 12 volts. Draws no power when not in use, so it can't run down your battery.
Works with any standard cigarette lighter plug or 12 volt accessory plug.
The wire harness or loom is 60 inches heavy 16 AWG wire, has a socket boot that covers the terminals of the socket, also has female quick connects to plug into the socket, 1/4" ring connectors to attach to your battery or terminal block and a waterproof automotive mini type fuse holder and fuse. Easy to hook up with red for positive and black for negative.
The Mount fits handlebars from 7/8" to 1-1/16" The socket press fits into the mount for a tight fit
The lighter plug is nickel plated and is the pop out type. When pushed into the socket will get hot in less than 60 seconds and pop out. Draws 6 amps. The plug has a rubber skirt that cptures the socket when pluged in and prevents water intrusion and possible short circuits.