This is a listing for a twin dual USB charger combination. Comes with a jumper cable that allows you to make one connection to both. The material are of high quality and can be used for outside operation. No LED to draw down your battery. #ycn8/cykd/cykd/tplt
The charger body is a heavy nylon with all nickel plated parts. The weatherproof cap fits into and over the front of the charger to keep moisture out when not in use. The charger has 0.250 male spade type terminals for easy wire connections.
This assembly has a replicable USB charger core, No LED and a tight fitting sealing cap that covers the whole.
This charger is rated for 2.1 amps at 5 vdc and can accept two USB devices. The charger use built in integrated semiconductor technology to produce a constant 5 Volts DC This constant voltage source is important for operating and charging the batteries of your accessories, from a 12 (11-14) volt source. And unlike more expensive chargers this assembly is repairable since the charger insert can be removed and replaced without having to rewire or discard the whole unit.
This is an 8 inch 16 gauge jumper with 0.250 crimp connectors to allow both the socket and charger to be connected together with one connection to you harness.
The chargers fit in a 1-1/8” holes in panels up to 1-1/2 inch thick with just the backing nut. The two holes are side by side on 1-3/4” centers. The plate dimensions are 4.0” x 1.75” The mounting screw hole pattern is on 1" centers for the two holes on the short side, and on 3-3/8” centers for the two holes on the long side.
Higher volume discounts available for 10 or more contact us.