Cigarette lighter plug and socket with connectors, and opening cap - nickel plated socket and lighter plug. #ms0/cplg
The socket has a snap on socket lid that will always fit tight. Most sockets have a slip on socket lid that often does not stay seated. This socket has a lid that snaps on over the front of the socket that produces a waterproof seal.
This listing is for one lighter socket for accessory or hot lighter use, plus a hot pop out lighter plug.
The socket is for 12 volt use up to 20 amps. All parts are weather resistant and high quality. The assembly consists of an inter socket that is nickel plated and has a ceramic insulator with copper/brass contacts. The outer insulating shell is also nickel plated and screws onto the iner socket. The assembly comes with two female 0.250 crimp connectors and a vinyl snap on opening cap that seals the opening. The socket mounts in 7/8 inch hole and is held in place with the outer shell in panels upto 1/8 inch thick.
The plug has a high quality nickel and ceramic element and a comfortable handle. The plug works like all lighter plugs. When you push it into the socket it heats up and pops out when ready. Draws 5 amps at 12 volts when pushed in. Draws nothing when at rest so will not drain your battery.